Roller feed pellet machine (or a roller) gap adjustment is critical for the use of feed pellet machine.
Feed pellet machine for daily use have two kinds, namely flat die feed pellet machine and ring die feed pellet machine two major categories. Roller gap of flat die feed pellet machine adjustment is very simple and intuitive, gap depend directly on the roller at the upper end of the adjusting screw can control the mould pressing wheel, operation boot and feeding test can be carried out.
Ring modes of feed pellet machine is our most commonly used feed pellets, the higher price of the machine. This kind of roller gap adjustment of feed pellet machine relatively trouble. The first is to mould cover is opened, we can see directly is the roller frame plate, roller frame plate at both ends of the two adjusting discs, the screw loosen the fixing disk, or outward to push and pull the disc position, close to the mould is a small gap, away from the die for the large gap. After adjustment, manual rotation of feed pellet machine, with not too tight but can be mutually rub for reference. Then close the cover, switch on the power, test run, if the voice of the normal operation of invest a small amount of raw materials, production test. If the discharge is normal, can be put into production, if the engine abnormal sound or discharging is not smooth, will stop the feed pellet machine, carries on two times of mould pressing roll gap adjustment.
Particularly worth mentioning is that the flat roller gap mold feed pelleting machine and ring modes of feed pellet machine adjustment must comply with current within the rated range, the voice of the normal operation of the feed pellets and smooth discharging these rules. In addition, ring modes of feed pellet machine remember is adjusted in the power-off state, because the operation adjustment will have great danger.
Feed pellet machine manufacturers of professional, experience the use of feed pellet machine of professional Strongwin share with everyone!
没有评论:
发表评论