After puffing, the material temperature and moisture is relatively high, in order to ensure product quality and ease of operation, must be rapidly cooled. Extruder discharge of extruded corn currently is the main way the template material, geometric size is relatively large, select flap counterflow cooler or barrel-type cooler.Turning plate counterflow cooler small footprint but a higher height, barrel cooler height low is an area of relatively large.Coolers can be combined according to their production capacity and site space height space allocation.Normally cooler is shipped without the blower and turn off the wind, cooler manufacturer to fit fan and turn off the wind.Generally, at the fan outlet must be located an air volume regulating valve and cooling of materials with different characteristics and at installation time, Chakroun best asbestos duct insulation, prevent condensate ventilation network congestion caused by the winter.
Extruded materials after crushed again.Due to the relatively larger materials by the swelling size, in order to facilitate the next batching, mixing and working, material has to be crushed again.This grinding is very simple, very low energy consumption, than raw material mill power mill.
See more feed processing equipment from our website: http://www.toppelletmachine.com/production-line/
2014年12月29日星期一
2014年12月22日星期一
Feed processing mixer correct using methods and maintenance
Feed processing mixer proper use and maintenance, feed processing mixer application farming industry is very important, of course, in order to make animal feed mixer better play its role, it is necessary for its proper use, and maintenance.
1, before using the machine, check to deal with the whole conduct full pack, adjust the belt tension, and then plug in the power, press the mark direction of change.
2, scheduling press round "clamping screw" to between 0.1-0.3 mm pressure wheel with the template.
3, take the test machine 15 kg of powder, preferably with bran, bran, or 5 pounds of peanut and wheat skin 15 kg of meat, pressure test, repeat the rolling squeeze 15 minutes, the pressure not to feed the template hole vise clamp nail to get through, and then squeeze until the normal discharge. If the user pressed a recipe not feed, feed material then die hole open, flat die surface can put some food oil, then bran or bran feed peanuts meat and wheat skin press out above, and then participate repeat sand squeeze 10 minutes, until the normal discharge.
4, the pellets can be scheduled record length cutter down position.
5, if the exchange template can be removed to remove the barrel containing the hopper, remove the pressure roller and cutter, twist off the cap on the spindle gongs, with accessories "Rally" hanging out flat die.
6, in order to secure the production, when the lid is removed, it is necessary to break the power switch to turn off the machine, and other things to hand contact pressure wheel template.
7, when the machine rolled to two kilograms of pressure wheel removed for cleaning maintenance of copper oil, once every six months to maintain full refueling.
8,105A single-phase motor, please ensure that 220V voltage.
9, please use the equipment grounding great motor equipment.
10, the use of the motor model, the customer has the necessary equipment protection devices.
The process of re-use must pay attention to the above operations, and better maintenance, the only way to more long-term use.
1, before using the machine, check to deal with the whole conduct full pack, adjust the belt tension, and then plug in the power, press the mark direction of change.
2, scheduling press round "clamping screw" to between 0.1-0.3 mm pressure wheel with the template.
3, take the test machine 15 kg of powder, preferably with bran, bran, or 5 pounds of peanut and wheat skin 15 kg of meat, pressure test, repeat the rolling squeeze 15 minutes, the pressure not to feed the template hole vise clamp nail to get through, and then squeeze until the normal discharge. If the user pressed a recipe not feed, feed material then die hole open, flat die surface can put some food oil, then bran or bran feed peanuts meat and wheat skin press out above, and then participate repeat sand squeeze 10 minutes, until the normal discharge.
4, the pellets can be scheduled record length cutter down position.
5, if the exchange template can be removed to remove the barrel containing the hopper, remove the pressure roller and cutter, twist off the cap on the spindle gongs, with accessories "Rally" hanging out flat die.
6, in order to secure the production, when the lid is removed, it is necessary to break the power switch to turn off the machine, and other things to hand contact pressure wheel template.
7, when the machine rolled to two kilograms of pressure wheel removed for cleaning maintenance of copper oil, once every six months to maintain full refueling.
8,105A single-phase motor, please ensure that 220V voltage.
9, please use the equipment grounding great motor equipment.
10, the use of the motor model, the customer has the necessary equipment protection devices.
The process of re-use must pay attention to the above operations, and better maintenance, the only way to more long-term use.
2014年12月21日星期日
Six methods using in the process of processing and feed processing equipment
Feed processing equipment processing Using the following six ways:
1, cut short long fat: straw, sweet potato vine, grass, hay, vegetables, straw, etc., can be used after feeding livestock need chopped. Cows straw should be cut 2─3 cm; pigs 1─2 cm cut vegetables; sweet potato vine is made about 1 cm. General should be short not long, in order to achieve "Mito inch grass cut, no material also on fat" Feeding effect. If the impurity, such as silt to wash, sieve net.
2, grinding aid digestion: food (grain), sweet potato, cassava for animal feed must be crushed and then fed ground to aid digestion. The thickness of the degree of dispersion should be based on the type of feed and livestock may be. Pigs, cattle feed can be crushed or medium or coarse particles 1─2 mm; chicken feed grain should be ground into a powder. Sweet potato, cassava can be cut into pieces and then dried crushed sweet potato can also be fed beating.
3. Soak the softened: corn, wheat, sorghum, soybean meal and other feed, feed soaked before the best time to use some light salt boiling water to soften and then feed, saving feed, and easy to digest, eating poultry. General feed, water ratio of 1. Length of immersion time, should vary the type of season and feed-in and the hot summer weather soaking time should be short, to prevent rot feed.
4, adjust cooking flavors: beans, peas and soy grain feed, which uses the method of cooking and processing modulation. Practice shows, soybean after cooking, destroyed the soybean antitrypsin, enhanced palatability, improve the digestibility and nutritional value; while increasing the effective soybean protein methionine and cystine, improved biological value protein . But not too long cooking time, usually 50 minutes or so.
5, crisp and sweet roasted: roasting process is primarily a modulation method to concentrate feeding the pig. Grain feed, especially feed grain cereals, after a short time later 130─150 ℃ high temperature furnace, where part of the starch into dextrin, improve the utilization of starch, and can eliminate harmful bacteria, feed sweet, tasty, crispy increased appetite, good feeding effect.
6, silage preservation is good: the green material stored at various cellar, pool, cylinder, under anaerobic conditions for fermentation to produce lactic acid. Guarantees forage nutrients, improve forage utilization and digestibility. And the regulation of the season and off-season forage remaining places, the supply of off-season green sweat effective measures to feed.
1, cut short long fat: straw, sweet potato vine, grass, hay, vegetables, straw, etc., can be used after feeding livestock need chopped. Cows straw should be cut 2─3 cm; pigs 1─2 cm cut vegetables; sweet potato vine is made about 1 cm. General should be short not long, in order to achieve "Mito inch grass cut, no material also on fat" Feeding effect. If the impurity, such as silt to wash, sieve net.
2, grinding aid digestion: food (grain), sweet potato, cassava for animal feed must be crushed and then fed ground to aid digestion. The thickness of the degree of dispersion should be based on the type of feed and livestock may be. Pigs, cattle feed can be crushed or medium or coarse particles 1─2 mm; chicken feed grain should be ground into a powder. Sweet potato, cassava can be cut into pieces and then dried crushed sweet potato can also be fed beating.
3. Soak the softened: corn, wheat, sorghum, soybean meal and other feed, feed soaked before the best time to use some light salt boiling water to soften and then feed, saving feed, and easy to digest, eating poultry. General feed, water ratio of 1. Length of immersion time, should vary the type of season and feed-in and the hot summer weather soaking time should be short, to prevent rot feed.
4, adjust cooking flavors: beans, peas and soy grain feed, which uses the method of cooking and processing modulation. Practice shows, soybean after cooking, destroyed the soybean antitrypsin, enhanced palatability, improve the digestibility and nutritional value; while increasing the effective soybean protein methionine and cystine, improved biological value protein . But not too long cooking time, usually 50 minutes or so.
5, crisp and sweet roasted: roasting process is primarily a modulation method to concentrate feeding the pig. Grain feed, especially feed grain cereals, after a short time later 130─150 ℃ high temperature furnace, where part of the starch into dextrin, improve the utilization of starch, and can eliminate harmful bacteria, feed sweet, tasty, crispy increased appetite, good feeding effect.
6, silage preservation is good: the green material stored at various cellar, pool, cylinder, under anaerobic conditions for fermentation to produce lactic acid. Guarantees forage nutrients, improve forage utilization and digestibility. And the regulation of the season and off-season forage remaining places, the supply of off-season green sweat effective measures to feed.
2014年12月18日星期四
Using six methods of feed processing
1. Cut a short length of fat
Straw, sweet potato vine, grass, hay, vegetables, straw, etc., are required to be used to feed livestock after chopped. Cows straw should be cut 2--3 cm; pigs vegetables cut 1--2 cm; sweet potato vine is made about 1 cm. General should be short not long, in order to achieve "Mito inch grass cut, no material also on fat" Feeding effect. If the impurity, such as silt to wash, sieve net.
2. crushing aid digestion
Food (grain), sweet potato, cassava for animal feed, feed must be crushed and then ground to aid digestion. The thickness of the degree of dispersion should be based on the type of feed and livestock may be. Pigs, cattle feed can be crushed or medium or coarse particles 1--2 mm; chicken feed grain should be ground into a powder. Sweet potato, cassava can be cut into pieces and then dried crushed sweet potato can also be fed beating.
3. Soak the softened
Corn, wheat, sorghum, soybean meal and other feed, feed soaked before the best time to use some light salt boiling water to soften and then feed, saving feed, and easy to digest, eating poultry. General feed, water ratio of 1. Length of immersion time, should vary the type of season and feed-in and the hot summer weather soaking time should be short, to prevent rot feed.
4. Cooking tune taste
Beans, peas and soy grain feed, which uses the method of cooking and processing modulation. Practice shows, soybean after cooking, destroyed the soybean antitrypsin, enhanced palatability, improve the digestibility and nutritional value; while increasing the effective soybean protein methionine and cystine, improved biological value protein . But not too long cooking time, usually 50 minutes or so.
5. Roasted sweet cakes
Roasting process is primarily a modulation method to concentrate feeding the pig. Grain feed, especially feed grain cereals, after a short time after 130--150 ℃ high temperature furnace, where part of the starch into dextrin, improve the utilization of starch, and can eliminate harmful bacteria, feed sweet, tasty, crisp increase appetite, good feeding effect.
6. Good silage preservation
The green material stored at various cellar, pool, cylinder, under anaerobic conditions for fermentation to produce lactic acid. Guarantees forage nutrients, improve forage utilization and digestibility. And the regulation of the season and off-season forage remaining places, the supply of off-season green sweat effective measures to feed.
Straw, sweet potato vine, grass, hay, vegetables, straw, etc., are required to be used to feed livestock after chopped. Cows straw should be cut 2--3 cm; pigs vegetables cut 1--2 cm; sweet potato vine is made about 1 cm. General should be short not long, in order to achieve "Mito inch grass cut, no material also on fat" Feeding effect. If the impurity, such as silt to wash, sieve net.
2. crushing aid digestion
Food (grain), sweet potato, cassava for animal feed, feed must be crushed and then ground to aid digestion. The thickness of the degree of dispersion should be based on the type of feed and livestock may be. Pigs, cattle feed can be crushed or medium or coarse particles 1--2 mm; chicken feed grain should be ground into a powder. Sweet potato, cassava can be cut into pieces and then dried crushed sweet potato can also be fed beating.
3. Soak the softened
Corn, wheat, sorghum, soybean meal and other feed, feed soaked before the best time to use some light salt boiling water to soften and then feed, saving feed, and easy to digest, eating poultry. General feed, water ratio of 1. Length of immersion time, should vary the type of season and feed-in and the hot summer weather soaking time should be short, to prevent rot feed.
4. Cooking tune taste
Beans, peas and soy grain feed, which uses the method of cooking and processing modulation. Practice shows, soybean after cooking, destroyed the soybean antitrypsin, enhanced palatability, improve the digestibility and nutritional value; while increasing the effective soybean protein methionine and cystine, improved biological value protein . But not too long cooking time, usually 50 minutes or so.
5. Roasted sweet cakes
Roasting process is primarily a modulation method to concentrate feeding the pig. Grain feed, especially feed grain cereals, after a short time after 130--150 ℃ high temperature furnace, where part of the starch into dextrin, improve the utilization of starch, and can eliminate harmful bacteria, feed sweet, tasty, crisp increase appetite, good feeding effect.
6. Good silage preservation
The green material stored at various cellar, pool, cylinder, under anaerobic conditions for fermentation to produce lactic acid. Guarantees forage nutrients, improve forage utilization and digestibility. And the regulation of the season and off-season forage remaining places, the supply of off-season green sweat effective measures to feed.
Improve palatability what's a good way
On pig farming, the increased feed intake can maximize meat production and meat quality in feeding should think of ways to improve palatability, and are willing to take the initiative to eat the pigs feed, increased intake.
The use of flavors, studies have shown that pigs for sweets has a very significant preference sweeteners (containing 6.7% of sodium saccharin and other long-lasting flavor enhancers and synergist) can increase feed intake, but added level too high or too low is not conducive to pig feed intake of the play, in piglet growth phase (1 to 28 days), diets 150 mg / kg of compound sweetener can achieve the maximum daily intake, but also can get this biggest daily gain stage. In addition, experiments show that the flavoring agent with antioxidant function, with the extension of feed storage time, flavoring agents can effectively alleviate the degree of oxidation of feed.
Oxidation feed mildew, mold can take the following steps to oxidation:
(1) the storage of feed moisture content should be controlled within a certain range, generally not more than 12%, warehouse ventilation, insulation, ground moisture to do place, the relative humidity at 60% humidity cause mold growth too large, and is not conducive to the preservation of a high fat diet;
(2) the optimum temperature for the growth of mold 28 ~ 38 ℃, so to control the temperature of the warehouse, prevent mildew, highly unsaturated fatty acid in feed at higher temperatures to oxidative rancidity.
(3) the rational use of some antifungal powder and antioxidants to deal with some urgent situations feed moldy and rancid, but it will affect the nutritional value of the feed, it is not recommended for long-term use.
Reasonable process, there were reports that will be made of crushed grain feed pellets, the feed utilization can be increased by about 23%. Feed in the granulation process will go through the process of steam treatment and suppression of the high-pressure rubbing crowded, making feed grain cell rupture and release of intracellular substances to increase the nutritional content of the feed. Meanwhile, after pelletized feed, palatability, and when the feed reduces energy consumption, but also makes the feed more uniform, to avoid some kind of pig feed ingredients designed to pick eating.
Elimination of anti-nutritional factors, anti-nutritional factors are the main factors restricting feed efficiency, in order to reduce or eliminate the effects of anti-nutritional factors, can take a variety of approaches. The main treatment methods include physical treatment, chemical treatment, biological treatment and breeding of new varieties. Most of the anti-nutritional factors have thermal instability, such as a variety of protease inhibitors, lectins, and other anti-vitamin factors, it may be denatured by heating.
The use of flavors, studies have shown that pigs for sweets has a very significant preference sweeteners (containing 6.7% of sodium saccharin and other long-lasting flavor enhancers and synergist) can increase feed intake, but added level too high or too low is not conducive to pig feed intake of the play, in piglet growth phase (1 to 28 days), diets 150 mg / kg of compound sweetener can achieve the maximum daily intake, but also can get this biggest daily gain stage. In addition, experiments show that the flavoring agent with antioxidant function, with the extension of feed storage time, flavoring agents can effectively alleviate the degree of oxidation of feed.
Oxidation feed mildew, mold can take the following steps to oxidation:
(1) the storage of feed moisture content should be controlled within a certain range, generally not more than 12%, warehouse ventilation, insulation, ground moisture to do place, the relative humidity at 60% humidity cause mold growth too large, and is not conducive to the preservation of a high fat diet;
(2) the optimum temperature for the growth of mold 28 ~ 38 ℃, so to control the temperature of the warehouse, prevent mildew, highly unsaturated fatty acid in feed at higher temperatures to oxidative rancidity.
(3) the rational use of some antifungal powder and antioxidants to deal with some urgent situations feed moldy and rancid, but it will affect the nutritional value of the feed, it is not recommended for long-term use.
Reasonable process, there were reports that will be made of crushed grain feed pellets, the feed utilization can be increased by about 23%. Feed in the granulation process will go through the process of steam treatment and suppression of the high-pressure rubbing crowded, making feed grain cell rupture and release of intracellular substances to increase the nutritional content of the feed. Meanwhile, after pelletized feed, palatability, and when the feed reduces energy consumption, but also makes the feed more uniform, to avoid some kind of pig feed ingredients designed to pick eating.
Elimination of anti-nutritional factors, anti-nutritional factors are the main factors restricting feed efficiency, in order to reduce or eliminate the effects of anti-nutritional factors, can take a variety of approaches. The main treatment methods include physical treatment, chemical treatment, biological treatment and breeding of new varieties. Most of the anti-nutritional factors have thermal instability, such as a variety of protease inhibitors, lectins, and other anti-vitamin factors, it may be denatured by heating.
2014年12月17日星期三
Animal feed grinding fineness gnaw determine
Animal feed grinding fineness should vary depending on the type of farming.
Chicken feed should not be too small, because eating chicken pellets or crushed cereal material, with the thickness can be used. Rice, broken rice can be added directly to the granular mixer, grinding fineness wheat, barley at 2.5 mm or less appropriate, corn, rice and soybean material to be processed into a powder. When the soft-shell egg production of laying hens need calcium, calcium ideal feed particles, namely the limestone, shells and other ground sorghum grain particle size, in every night to feed the last time together again feed material. Because the particles of calcium longer residence time in the body of the chicken, the chicken body in favor of absorption and utilization, so calcium effect is good.
Piglet feed with special feed pellets or crushed better, beans and other energy feed can fry feed, pig 25 kg or less, can be fed ordinary pig feed; crushed fine of more than 25 kg pig feed degree can be controlled within 2 mm. Feed pigs, crushing the more detailed the better.
Cattle, fine grinding fineness can feed the sheep more than 2 mm, because cattle can ruminant feed ruminant slightly favor a little rough, improve feed digestibility. In the cow, feed the sheep can be crushed to less than 1 mm, in order to facilitate digestion.
Grinding fineness feed livestock species, taking into account, while also taking into account not so rich in fat feed grains such as corn, oats and other smash too small, too long storage time, to avoid rancidity deterioration.
Strongwin machinery is a professional feed machinery, feed production line manufacturer, we offer a variety of feed production equipment, whether you are to have their own farms, or would like to establish a feed production plant, you can contact us. We are happy to serve you.
Chicken feed should not be too small, because eating chicken pellets or crushed cereal material, with the thickness can be used. Rice, broken rice can be added directly to the granular mixer, grinding fineness wheat, barley at 2.5 mm or less appropriate, corn, rice and soybean material to be processed into a powder. When the soft-shell egg production of laying hens need calcium, calcium ideal feed particles, namely the limestone, shells and other ground sorghum grain particle size, in every night to feed the last time together again feed material. Because the particles of calcium longer residence time in the body of the chicken, the chicken body in favor of absorption and utilization, so calcium effect is good.
Piglet feed with special feed pellets or crushed better, beans and other energy feed can fry feed, pig 25 kg or less, can be fed ordinary pig feed; crushed fine of more than 25 kg pig feed degree can be controlled within 2 mm. Feed pigs, crushing the more detailed the better.
Cattle, fine grinding fineness can feed the sheep more than 2 mm, because cattle can ruminant feed ruminant slightly favor a little rough, improve feed digestibility. In the cow, feed the sheep can be crushed to less than 1 mm, in order to facilitate digestion.
Grinding fineness feed livestock species, taking into account, while also taking into account not so rich in fat feed grains such as corn, oats and other smash too small, too long storage time, to avoid rancidity deterioration.
Strongwin machinery is a professional feed machinery, feed production line manufacturer, we offer a variety of feed production equipment, whether you are to have their own farms, or would like to establish a feed production plant, you can contact us. We are happy to serve you.
2014年12月11日星期四
The third layer structure of Strongwin model plant
pellet feed unit increase the particle section on the basis of producing powder feed compelete sets of equipment.
particles section equipment mainly includes particle machine,cooler, crushed machine, grader,packaging scale etc.
particles section equipment mainly includes particle machine,cooler, crushed machine, grader,packaging scale etc.
The fourth layer structure of Strongwin model plant
Henan Strongwin follows the ideals of "Customers Oriented, Common Development". We are making great efforts to offer high quality feedstuff machines, biomass energy grinding machines and organic fertilizer machines. We can make coal and biomass into energy.
The fifth layer structure of Strongwin model plant
Henan Strongwin machinery is a professional feed machinery, feed production line manufacturer, we offer a variety of feed production equipment, whether you are to have their own farms, or would like to establish a feed production plant, you can contact us. We are happy to serve you.
The fifth layer structure of Strongwin model plant
Henan Strongwin machinery is a professional feed machinery, feed production line manufacturer, we offer a variety of feed production equipment, whether you are to have their own farms, or would like to establish a feed production plant, you can contact us. We are happy to serve you.
2014年12月3日星期三
Chicken feed formulation
First,feed mix
1. Diversification feed, pig feed generally consists of energy feed, protein feed, mineral feed, vitamins feed four composed of various types of feed as much as possible when using several, in order to improve the efficiency and utilization of the full price of feed.
2. Feed the appropriate volume, the energy content per kg of feed concentration should be appropriate, excessive eating pig waste, and even reach satiety; low feed volume is too large, eat so much energy and nutrients will not be met .
3, the control of crude fiber content, better palatability, digestible crude fiber affect palatability, digestion and absorption, an important factor in feed conversion, generally crude fiber content of not more than 6% to 8%.
4, as far as possible the use of local feed to reduce costs.
5, appropriate to add trace elements, vitamins and anti-bacterial growth agent.
Second, feed modulation
1, ground grain, corn, etc. should be crushed.
2, raw and cooked feed generally feed raw feed, but beans and other feed if feed hemp taste bitter, poisonous feed and restaurants close to the leftovers and tuber root class feed to be fried or cooked.
3, raw wet spices have a very fine dust or wet feed raw spices best to avoid feed into the respiratory tract. 1:0.5 watered amount to 1.5.
Thank you very much concerned about our content, if you want to customize the production and processing of feed, please contact us. Our factory can provide comprehensive, complete sets of feed pellet production line according to your needs.
1. Diversification feed, pig feed generally consists of energy feed, protein feed, mineral feed, vitamins feed four composed of various types of feed as much as possible when using several, in order to improve the efficiency and utilization of the full price of feed.
2. Feed the appropriate volume, the energy content per kg of feed concentration should be appropriate, excessive eating pig waste, and even reach satiety; low feed volume is too large, eat so much energy and nutrients will not be met .
3, the control of crude fiber content, better palatability, digestible crude fiber affect palatability, digestion and absorption, an important factor in feed conversion, generally crude fiber content of not more than 6% to 8%.
4, as far as possible the use of local feed to reduce costs.
5, appropriate to add trace elements, vitamins and anti-bacterial growth agent.
Second, feed modulation
1, ground grain, corn, etc. should be crushed.
2, raw and cooked feed generally feed raw feed, but beans and other feed if feed hemp taste bitter, poisonous feed and restaurants close to the leftovers and tuber root class feed to be fried or cooked.
3, raw wet spices have a very fine dust or wet feed raw spices best to avoid feed into the respiratory tract. 1:0.5 watered amount to 1.5.
Thank you very much concerned about our content, if you want to customize the production and processing of feed, please contact us. Our factory can provide comprehensive, complete sets of feed pellet production line according to your needs.
订阅：
博文 (Atom)